Natural gas 8 ton industrial boiler risers arranged in the corner of the room as much as possible the natural gas boiler standpipe arranged in the corner of the room, especially at the junction of two exterior walls. On each riser pipe, the lower end of the valve should be installed, turn on the water for inspection. For small riser systems can also be supplied only in the partial rings, valves coat return water pipe. Double-pipe water supply system is typically placed on the right side facing the riser when the riser and manifold intersects competent should bypass manifold. In addition to the stairwell and the auxiliary room (e.g., toilet, kitchen, etc.) can be combined with a standpipe, the standpipe is generally advised separately provided, so as not to affect the heating space at the time of inspection. Return water pipe can be laid on the ground, does not allow the laying of time (e.g., when married), or not enough headroom, return water pipe passage disposed in a semi-trench or trench on the floor to pass. There are two approaches, should be located at a distance from movable cover, married trench should be provided movable cover, in order to repair the pipe trench every backwater interlude. Return water pipes should also be noted that there is a certain slope to facilitate draining. In order to exclude the air in the system, gas-fired, current tank should be provided at the end of the water mains, and the tank should be set in a room or place provided with a drainage facility. If you can not meet this requirement, it should be put to a place near the trachea drainage facilities in order to exhaust. In order to effectively exclude air from the system, all levels of water in the pipe should have a slope of not less than 0.002, usually 0.003 (mechanical or gravity circulation aspect according to the given cycle, as described above). As a result of conditions, mechanical circulatory system of hot water pipes can be laid without slope, but the tube is not less than 0.25m per second water flow.
Former Lu'an gas steam 8 ton industrial boiler installer to install gas steam boiler, be sure to fill out the "boiler installation started this book", incidentally include at least the following material to the boiler management authority customer location gas boiler steam boiler installation license application formalities, construction can be permitted rear work: ① gas steam boiler installation license copy; ② gas steam boiler installation boiler installation started this book and embodiments of the boiler; ③ gas steam boiler certificate material; ④ boiler room equipment boiler room equipment layout plan and design drawings; ⑤ installation companies operations staff to participate in professional certification. Former gas steam boiler installation, be sure to install the company also completed incidentally permitted "to install the boiler started this book" to the gas steam boiler and pressure vessel inspection quality inspection authorities at the customer site signing "the agreement to install quality of responsibility" by the Inspection Department of the gas-steam standard for the installation of the boiler to monitor.
Gansu price pressure 8 ton industrial boiler is out of the hot water boiler how much pressure can reach 100 or more. Therefore, companies need greater than 100 degrees for hot water, the pressure of the boiler is required. Customer Advisory recent price pressure boiler Gansu. At present, the company requires more than hot water at 100 degrees, so the use of boiler pressure is quite appropriate. After a detailed analysis by the amount of enterprise data with hot water, and concluded that the company used two tons of Gansu pressure boiler it is possible. Currently the price of two tons of pressure boiler at about 24 million.
Our company attaches great importance to the quality of wine, winemaking process steam requirements provided very strict, party fast 8 ton industrial boiler provides fully meet our needs, give us a brewery to provide strong support. --customer feedback
[email protected]
